Search CatalogGO
Products Reciprocating Compressor Rotary Screw Air
Compressors Air Treatment Filters & Accessories Lubricants & Repair Parts Demand Expanders Refrigerated Air DryersCentrifugal CompressorsCycling DryersVariable Speed Compressors
Service, Parts and Rentals Parts DepartmentService DepartmentRentals Chicago Pneumatic Parts Used Machinery  

All Categories > Air Treatment Filters & Accessories > DGH Series - Heatless Desiccant Dryers > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

DGH Series - Heatless Desiccant Dryers

 
Check up to five results to perform an action.

Global Air Treatment

Gardner Denver DGH Series Heatless Desiccant Dryers were designed to help you meet your goals. Customizable performance technology is integrated into our standard product so it can be tailored to benefit your specific critical compressed air drying application. Now, you have the liberty to personalize the performance of the standard product to adapt to your specific needs.
  • Pressure drop at rated flow is less than 5 psi
  • Standard voltages: Controllers automatically identify and adapt the controller:
    • Basic: 100-120V/1ph/5-60Hz;
    • Standard and Energy Savings controller: 100-240V/1ph/50-60Hz & 12-24 VDC
    • NEMA 4 Standard Feature with Standard and Energy Savings controllers

    Inlet flows are established in accordance with CAGI Standard ADF-200: Dual Stage Regenerative Desiccant Compressed Air Dryers-Methods for Testing and Rating. Conditions for rating dryers are: inlet pressure of 100 psig, inlet temperature saturated at 100°F.

    Average purge flow rate is the amount of purge air used during the regeneration portion of the purge cycle (purge/repressurization valve open) plus the volume of air used to repressurize the tower after the purge/repressurization valve closes averaged over the cycle time. At 100 psig, the average purge rate is: 14.4% (13.7% for regeneration + 0.7% for repressurization) of rated inlet flow for dryers operating on a 10 minute cycle; 15.5% (13.7% for regeneration + 1.8% for repressurization) for dryers on a 4 minute cycle.

    Outlet Flow: To determine flow of air available at outlet of dryer, subtract purge flow from inlet flow.



Compare Items
   
  Results 1 - 18 of 18 1 

Item #

Inlet Flow at 100 psig, (7 bar)

Height

Width

Depth

Connections

Weight
DGH40 40 46 in 32 in 32 in 1" NPT 365 lb
DGH60 60 61 in 32 in 32 in 1" NPT 445 lb
DGH90 90 78 in 32 in 32 in 1" NPT 575 lb
DGH115 115 54 in 44 in 38 in 1" NPT 685 lb
DGH165 165 54 in 44 in 38 in 1" NPT 685 lb
DGH260 260 72 in 48 in 38 in 2" NPT 1010 lb
DGH370 370 63 in 55 in 38 in 2" NPT 1215 lb
DGH450 450 71 in 55 in 38 in 2" NPT 1350 lb
DGH590 590 101 in 52 in 48 in 2" NPT 1473 lb
DGH750 750 104 in 54 in 48 in 2" NPT 2134 lb
DGH930 930 109 in 59 in 56 in 2" NPT 2414 lb
DGH1130 1130 112 in 63 in 56 in 3" ANSI Fig. 2875 lb
DGH1350 1350 117 in 65 in 56 in 3" ANSI Fig. 3722 lb
DGH1550 1550 115 in 71 in 56 in 4" ANSI Fig. 4167 lb
DGH2100 2100 116 in 79 in 56 in 4" ANSI Fig. 4417 lb
DGH3000 3000 122 in 78 in 65 in 4" ANSI Fig. 9010 lb
DGH4100 4100 122 in 93 in 85 in 6" ANSI Fig. 9900 lb
DGH5400 5400 122 in 102 in 86 in 6" ANSI Fig. 12000 lb
  Results 1 - 18 of 18 1 
Site created by ThomasNet Web Solutions
Energy Machinery | New England's Compressed Air Specialists | Call Toll Free : 1-800-643-4330 | E-mail : info@energymachinery.cominfo@energymachinery.com