Home
About Energy Machinery
Energy Conservation
Line Card
Contact Us
Request Information
Search Catalog
By Part Number
By Keyword
Products
Reciprocating Compressor
Rotary Screw Air
Compressors
Air Treatment Filters & Accessories
Lubricants & Repair Parts
Demand Expanders
Refrigerated Air Dryers
Centrifugal Compressors
Cycling Dryers
Variable Speed Compressors
Service, Parts and Rentals
Parts Department
Service Department
Rentals
Chicago Pneumatic Parts
Used Machinery
All Categories
>
Refrigerated Air Dryers
>
HPR and HPRN Value Series Refrigerated Compressed Air Dryers
>
Item # HPRN150-2
Printable Page
Email This Page
Save To Favorites
Please wait…
Item # HPRN150-2, 0.91 Kilowatt (kW) Power HPRN Value Series Refrigerated Compressed Air Dryer
larger image
Reliable Operation…
Customers around the world have relied on Hankison® for great value in air treatment solutions. Hankison® Value Line Refrigerated Dryers offer a simple solution based on a long history of industry leading technology.
Specifications
·
Ease of Monitoring
·
Safety First - Environmental Friendly
·
Globally Proven Performance
·
Efficient Condensate Management
·
International Air Quality Class Standards
Specifications
Rated Flow
1
150
scfm
255
m³/h
Refrigerant
R407c
Voltage
230
V
Phase
1
Frequency
60
Hz
Power
0.91
kW
Inlet Connection Size
1
in
Inlet Connection Type
NPT
Outlet Connection Size
1
in
Outlet Connection Type
NPT
Height
24
in
Width
14
in
Depth
35
in
Weight
152
lb
Maximum Inlet Air Pressure
232
psig
16
bar
Minimum Inlet Air Pressure
10
psig
1
bar
Maximum Inlet Air Temperature
120
ºF
49
ºC
Minimum Inlet Air Temperature
40
ºF
4
ºC
Maximum Ambient Air Temperature
110
ºF
43
ºC
Minimum Ambient Air Temperature
45
ºF
7
ºC
Series
Hankison®
HRP
HRPN
1
Conditions for rating dryers are in accordance with ISO 7183 (Option A2). Compressed air at dryer inlet: 100 psig (6.7 bar) and 100 ºF (38 ºC); ambient air temperature: 100 ºF (38 ºC); operating on 60 Hz power supply.
Ease of Monitoring
Models 75 - 150: Illuminated On/Off Switch; dew point temperature display indicator to monitor inlet load conditions.
Models 200 - 500 scfm: Illuminated On/Off Switch; LED dew point temperature display; dry alarm contact.
Equipped with panel mounted drain timer control.
Safety First - Environmental Friendly
Models 75 -125 scfm CFC free R134a.
Models 150 - 500 scfm R407c refrigerant.
CSA approved.
Globally Proven Performance
Stainless steel, cross flow heat exchangers optimize heat transfer and service life.
ISO 8573-1 Air Quality : Class 4 pressure dew point.
Smooth, non-fouling channels promote low pressure drop.
Herringbone geometry stamped into the stainless steel plates creates turbulent flow, for a self-cleaning effect.
No pre-filter required for full 2 year warranty.
5 year heat exchanger warranty.
Stainless steel inlet and outlet connections promote corrosion free service.
Compact design saves floor space.
Efficient Condensate Management
Increased calming zone and integral demister/separator captures liquid condensate and solid particles<.ul>
Effectively removes condensate from 0 to 100 % flow conditions without moisture carry-over.
Furnished with a timed electric condensate drain.
Includes a Y-strainer to protect the valve from rust and scale.
International Air Quality Class Standards
ISO 8573-1 Air Quality Standard
ISO 8573-1, the international standard for compressed air quality, defines the amount of contamination permissible in compressed air.
The ISO standard identifies three primary forms of contamination in compressed air systems - solid particles, water and oil Contaminants are classified and assigned a quality class, ranging from Class 0, the highest purity level, to Class 6, the most relaxed.
HPR and HPRN series refrigerated air dryers offer the perfect balance between technology and simplicity to dry compressed air systems to ISO 8573-1 Air Quality Class 4 to 5 - pressure dew points.
Option Pre-Filtration
NGF series - PF grade filtration - removes solid and oil contaminants from the air stream before entering the dryer.
ISO Air Quality Class:
Solids - Class 2
Remaining Oil - Class 4
Removes solids 1.0 micron and larger
Remaining oil content 2.0. mg/m³
Option After-Filtration
NGF series - HF grade filtration - provides high efficiency oil removal protecting downstream equipment .
ISO Air Quality Class:
Solids - Class 1
Remaining Oil - Class1
Removes 99.999+ % of solids ≥ 0.01 micron
Remaining oil content < 0.01 mg/m3
MORE IMAGES
·
Efficient Smooth Copper Heat Exchangers
·
Air Bypass Valve
·
Value at its finest...
·
Adjustable Timed Electric Drain
·
Performance at its best…
·
Stainless Steel Demister/Separator
·
HPR and HPRN Value Series Refrigerated Compressed Air Dryers - 2
·
Capacity Correction Factors for HPR and HPRN Value Series Refrigerated Compressed Air Dryers
Site created by
ThomasNet Web Solutions
