Search CatalogGO

All Categories > Reciprocating Compressor > A Series Reciprocating Compressors, Vacuum Pumps, and Boosters for Air and Natural Gas > Item # ATLE6  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # ATLE6, ATLE6 Single Stage Reciprocating Compressor

List Price QUOTE


The Champion ATLE6 is a single stage, two cylinder, pressure lubricated compressor that is equipped with an SAE#3 bell housing flange for direct engine mounting and remote site operation.




Specifications  · Dimensions  · Lubrication  · Valves  · Standard Features  · Additional Information

Specifications

Motor Power

29 hp
22
kW

Number of Cylinders

2

Speed at 29 hp (22 kW) Power

1550 rpm

Piston Displacement

262 ft³/min
7.8
m³/min

Oil Capacity

9 liq qt
8.5
L

Maximum Pressure

30 psig
2.07
bar

Discharge Air Temperature

400 ºF
204
ºC

Duty Cycle

Intermittent

Flow

180 ft³/min
5.1
m³/min

Industry Standards/Certifications

Compressed Air and Gas Institute (CAGI)
Energy Star Partner

ISO 9001:2008


Dimensions

Bore Diameter

7.875 in
200
mm

Stroke

3 in
76
mm

Suction and Discharge Pipe Size

3 in

Inlet Port Design

NPT

Discharge Port Design

NPT

Length

41 in
1041
mm

Width

29 in
737
mm

Height

30 in
762
mm

Weight

750 lb
340
kg


Lubrication
  • Superior lubrication is accomplished through a gear driven oil pump powered by the crankshaft.
  • Pressurized system ensures complete lubrication to the crankshaft, connecting rods, bearings and piston pins.
  • Full flow, spin-on oil filter ensures impurities are removed before the lubricant contacts any internal components.
  • Oil pressure gauge is conveniently mounted to display the oil pressure.




Valves
  • Concentric ring design incorporates both the inlet and outlet valves in one assembly.
  • Designed to give 100% exposure to the air flow for maximum efficiency (i.e. more CFM per HP).
  • Discs and springs are made of AISI 420 stainless steel to give dependable corrosion-free and fatigue-free service life.




Standard Features
  1. ASME pressure relief valve protects the intercooler and first stage from over pressure.
  2. Suction unloading valves (where applicable) provide load less starting and stopping as well as quick response to capacity demands.
  3. Removable hand-hole plate allows easy access to the internal running gear.
  4. Tri-Metal insert bearings are two-piece for quick and easy replacement.
  5. Counterbalanced crankshaft assures smooth operation.
  6. Replaceable piston pin bearings are very economical when replacement becomes necessary.
  7. Deep-finned cylinders and heads quickly dissipate the heat of compression.
  8. Crankshaft ends are supported by large tapered roller bearings for smooth operation and long life.
  9. Oil pressure gauge assures the operator of lubrication system integrity.
  10. The cylinders and crankcase are built of industrial strength cast iron materials.
  11. Continuous Operation




Additional Information
Wherever there's a demand for a low pressure engine driven compressor, the ATLE6 is the compressor for the job. Because it is direct coupled to the engine, there is no need to worry about belts slipping or wearing out. When connected to the engine, all rotating components are totally enclosed and protected from the environment.

Low Pressure Bare
Factory Fill with ChampLub 500



 MORE IMAGES 

·  A Series Reciprocating Compressors, Vacuum Pumps, and Boosters for Air and Natural Gas - 2

·  Standard Features for A Series Reciprocating Compressors, Vacuum Pumps, and Boosters for Air and Natural Gas

·  Industry Standards/Certifications for A Series Reciprocating Compressors, Vacuum Pumps, and Boosters for Air and Natural Gas

·  ATLE6 Single Stage Reciprocating Compressor - 2

·  ATLE6 Single Stage Reciprocating Compressor - 3

·  ATLE6 Single Stage Reciprocating Compressor - 4

·  ATLE6 Single Stage Reciprocating Compressor - 5


Site created by ThomasNet Web Solutions
Energy Machinery | New England's Compressed Air Specialists | Call Toll Free : 1-800-643-4330 | E-mail : info@energymachinery.cominfo@energymachinery.com