Energy Machinery, Inc.
10 Reservoir Park Drive Rockland, MA 02370
Phone:781-871-6220 • Fax:781-878-7085• Toll Free:1-800-643-4330
E-Mail: info@energymachinery.com • Web site: www.energymachinery.com
All Categories > Rotary Screw, Scroll & Vane Compressors > ESM 6 Series Screw Air Compressors > Item # ESM 6 - Mounted on 500 L receiver  


Item # ESM 6 - Mounted on 500 L receiver, 1950 Millimeter (mm) Length ESM 6 Series Screw Air Compressor
List Price QUOTE

Maximum Flexibility

The compact design of the ESM 6 allows you to install the package quickly and efficiently.





Technical Data ESM 6  · Specifications  · Optional Maximum Flexibility  · Easy to Use  · Simple Maintenance  · Low Operating Costs  · Your Benefits at a Glance  · AirBasic2 Controller  · Options  · Standard Equipment  · Optional Equipment  · Auxiliary Equipment  · Note

Technical Data ESM 6

Maximum Target Pressure1
13 bar
190 psig

Capacity at Working Pressure2
0.74 m³/min
26 ft³/min

Motor Power
7.5 kW
10 hp

Noise Level3
67 dBA

Length
1950 mm

Width
680 mm

Height
1635 mm

Net Weight4
360 kg
1 Capacity and Power measurements according to ISO 1217. Measured at maximum pressure without any options.
2 Capacity and Power measurements according to ISO 1217. Measured at maximum pressure without any options.
3 Noise values determined according to ISO 2151 and ISO 3744; Variation ± 3 dB (KpA)
4 Additional weight for add-on dryer 41 kg


Specifications

Air Receiver Capacity
500 L

Industry Standards/Certifications
ISO 2151
ISO 3744
ISO 7183

Series
ESM

Brands
Gardner Denver™


Optional Maximum Flexibility
Based on the customer requirements, these compressors can be supplied with many special options to provide a complete compressor station:
  • Tank mounted on 500 L receiver
  • Tank mounted and with add-on refrigerant dryer plus filter kit
  • Different pressures available at 8, 10, and 13 bar


Easy to Use
This package was designed to keep the design concept as simple as possible while at the same time it is so quiet that it can be installed where it is needed without special consideration for noise.

The electronic AirBasic2 controller has four easy-to-use operating buttons including easy adjustment of pressure settings via the controller.

Also the air end rotation control and following maintenance timer are displayed:
  • Air filter replacement
  • Oil filter replacement
  • Separator filter replacement
  • Oil change
  • Regular maintenance advise


Simple Maintenance
Installation takes only a few minutes. All the service points are easily accessible through the removable side doors.

The simple design minimizes the number of moving parts, resulting in lower maintenance costs.
Air/Oil filter separator and oil filter are mounted side by side to ensure easy access for maintenance purposes.


Low Operating Costs
ESM 6 compressors are optimal for users who want to attain the best possible working pressure with cost-effective functioning and low running costs. By using the high quality parts, you'll be able to reduce compressor's operation and maintenance costs and obtain the best possible result.


Your Benefits at a Glance
  • High Reliability
  • Silent Operation
  • Designed to reduce and simplify maintenance operations
  • Easy to use
  • Advanced ENDURO® air end


AirBasic2 Controller
Pressure setting can be easily adjusted via the controller.


Options
Automatic condensate drain system
Kit of filters with by-pass


Standard Equipment
  • Air-inlet filter
  • Overload relay protection
  • Star/delta starter with AirBasic2 electronic controller
  • Pressure sensor for pressure control
  • Electric motors, IP 55, F-class insulation
  • Oil level monitoring, sight glass
  • Belt transmission
  • Safety devices for:
    • Motor overload
    • Compressor over temperature, trip at 110ºC
    • Compressor overpressure (safety valve)
  • Running condition indicators:
    • Pressure
    • Temperature
  • Total hours and load hours counter
  • Epoxy powder coated enclosure
  • After cooler
  • Oil thermostat
  • ENDURO® air end
  • Factory fill - AEON™ 3000 lubricant


Optional Equipment
  • Special voltages
  • Refrigerant add-on dryer; 3ºC dew point at 25ºC ambient temperature (ISO 7183), refrigerant fulfils the EC norm No. 2037/2000 requirements
  • Filter kit for add-on dryer
  • Timed automatic drain for receiver


Auxiliary Equipment
  • Compressed air after treatment products.


Note
For additional information please contact Gardner Denver™ or your local representative.



Print Back