
|
|
|
Item # LHRA15-12, Simplex Tank Mounted
|
|
|
|
The Gardner Denver Reward Series offers a complete line of compressed air packages that meet any application.
The Reward Series has been carefully engineered to stand up to years of use.
Every Reward Series compressor arrives with up to six standard, pre-installed accessories.
|
|
|
|
|
|
|
Heavy Duty Two Stage, Splash Lubricated Air Compressor Pump(s)
Multi-Finned Cylinders
Integral Cylinder Head
Intercoolers for Cooling Between Stages
Reliable High Flow Disc Valves
Oversized Main Bearings
Balanced Crankshaft
Oil Level Site Glass
Centrifugal Unloader for Loadless Starting
0-300 PSIG Air Pressure Gauge
Bucket High Drain Valve
Factory Fill with AEON™ Lubricants
OSHA Approved Belt Guard
ASME Code Air Receiver
– Pressure Relief Valve
– Service Valve
– Drain Valve
– Pressure Gauge
U.L. Listed Electrical Components
Vertical or Horizontal Configurations
Oversize Inlet Filter – Silencers
Mounted Magnetic Starter
Vibration Isolator Pads
Automatic Tank Drain
Low Oil Level Monitor
Air Cooled Aftercooler
Dual Control on 10 HP Simplex and Above
|
|
|
|
Each new Gardner Denver Assembled Unit has a five (5) year warranty on the compressor pump only, against defects in
materials or workmanship under normal use and service, from the date of installation or sixty-six (66) months from the date of
shipment by Gardner Denver or a Gardner Denver distributor, whichever may occur first.
The five-year extended warranty covers parts and labor and is prorated over the five years as follows:
Year One — 100% coverage
Year Two — 90% coverage
Year Three — 80% coverage
Year Four — 70% coverage
Year Five — 60% coverage
Head valves are warranted for Year One only. Gardner Denver makes no warranty on components and/or accessories
furnished to Gardner Denver by third parties, such as electric motors, gasoline engines and controls. These are warranted
only to the extent of the original manufacturer’s warranty to Gardner Denver.
Includes a five-year warranty on the air receiver, pump and motors.
|
|
|
|
Gardner Denver, in common with other major, industrial compressor manufacturers, does not market compressors
which are U.L. listed. In general, U.L. is concerned with electrical components that may be utilized on compressor
units, rather than a complete compressor package or system.
All electrical components used on Gardner Denver compressors are U.L. listed. Each component – motor, starter, pressure
switch, control panel – carries a U.L. identification mark on the nameplate or inside the electrical enclosure cover. The mark
will be the letters “UR” reversed (as if held up to a mirror), indicating the item is “recognized” by U.L.
|
|
|
|
|
|
|
|
 |
|
|
|
|
|