Type |
N/A Horizontal Duplex Tank Mount |
Stage |
N/A Two |
Motor Power |
N/A 15 (2) hp |
Tank Size |
N/A 250 |
Pump |
N/A WTR |
Speed |
N/A 1450 rpm |
CFM Delivery at 125 psig |
N/A 96.8 cfm |
CFM Delivery at 175 psig |
N/A 96.0 cfm |
Bore Diameter |
N/A 4.72 & 3.54 in |
Stroke |
N/A 1.97 in |
Length |
N/A 84 in |
Width |
N/A 67 in |
Height |
N/A 72 in |
Weight |
N/A 3480 lb |
N/A
With the perfection of oil-Less air
technology by Gardner Denver, new
applications are being developed everyday:
Gardner Denver PureAir oil-less compressor units meet NFPA99 standard requirements for medical air compressors. NFPA was created in 1896 as a standards making body. Today, over 66,000 fire safety professionals belong to the NFPA, the world’s largest and most influential fire safety organization. NFPA has published almost 300 codes and standards with the mission of preventing the loss of life and property. Topics include fire prevention equipment, extinguishing systems, inspection, residential and commercial dwellings, safety of flammable gases, and the very important National Electrical Code. |
N/A
Gardner Denver meets the need
|
N/A A wide selection of configurations and options allow you to customize the compressor system to your specific needs: Totally Dry Crankcase Designed to maintain continuous operation. Finned to maximize efficient heat transfer. Large cover provides easy access to internal parts for service. Pistons Patented design with “Iso-Temp” coating on top to isolate piston, rings and connecting rod bearings from the full heat of compression. Provides exceptional thermal heat barrier for extended ring life -10,000 hours or more! Piston Rings Designed for oil-less compressor service with three compression rings and two guide rings. Exclusive “O” ring pumper prevents axial movement of the guide rings and eliminates end wear. Formulated of filled PTFE material for long life and compatibility with the hardened nickel-plated, polished surface of the cylinder bore. Crankshaft Cantilevered crankshaft design provides superior balance and long life. |
N/A
Air-cooled Aftercooler
|
N/A
From air intake to end use, Gardner Denver can supply all the components
and systems needed for your oil-less compressor application.
We’re a complete systems designer, manufacturer,
and supplier.
|
N/A
Ensuring Dependable Performance
The above applies to Gardner Denver manufactured compressor units only. Express Limited Warranty Gardner Denver makes no warranty with respect to components and accessories furnished to Gardner Denver by third parties such as electric motors, aftercoolers, control panels, air receivers, etc. These components and accessories are warranted only to the extent of the original manufacturer’s warranty to Gardner Denver. When a compressor pump or component is changed or replaced during the warranty period, the new/replaced item is warranted for only the remainder of the original warranty period. Replacement parts purchased during the normal operation of the unit for non-warranted replacement due to normal wear and tear are warranted against defects in material and workmanship for a period of ninety (90) days. Repair, replacement or refund in the manner and within the time provided shall constitute Gardner Denver’s sole liability and your exclusive remedy resulting from any nonconformity or defect. Gardner Denver shall not in any event be liable for any damages, whether based on contract, warranty, negligence, strict liability or otherwise, including without limitation any consequential, incidental or special damages, arising with respect to the equipment or its failure to operate, even if Gardner Denver has been advised of the possibility thereof. Gardner Denver makes no other warranty or representation of any kind, except that of title, and all other warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, are hereby expressly disclaimed. No salesman or other representative of Gardner Denver has the authority to make any warranties. Warranty periods are from date of start-up by the distributor or customer at his place of business. If any extended period of storage prior to start-up is expected, it is the responsibility of the customer or Distributor to so advise Gardner Denver’s Service Department of the expected storage time prior to start-up. If this is longer than six (6) months it must be advised in writing and approved by Gardner Denver’s Service Department of the expected storage time prior to start-up. |
N/A
The features and benefits of Gardner Denver
air compressors can be applied in many
industries. There’s a size and type of Gardner
Denver to match a wide variety of needs and
preferences.
|