Energy Machinery, Inc.
10 Reservoir Park Drive Rockland, MA 02370
Phone:781-871-6220 • Fax:781-878-7085• Toll Free:1-800-643-4330
E-Mail: info@energymachinery.com • Web site: www.energymachinery.com
All Categories > Reciprocating Compressor > A Series Reciprocating Compressors, Vacuum Pumps, and Boosters for Air and Natural Gas > Item # AVLAVCAA  


Item # AVLAVCAA, AVLAVCAA Two Stage Reciprocating Compressor
List Price QUOTE

AVLAV is a two stage air compressor bare. All A-Series compressors are designed to provide optimum performance in a wide variety of operations.

Pressure Lubricated

Factory Fill with ChampLub 500





Specifications  · Dimensions  · Compressor Specifications  · Lubrication  · Valves  · Standard Features

Specifications

Pressure
25 inHg to 350 psig
6.9 to 17.24 bar

Motor Power
25 hp
30 hp
19 kW
22 kW

Construction Material
Cast Iron

Industry Standards/Certifications
Compressed Air and Gas Institute (CAGI)
Energy Star Partner
ISO 9001:2008


Dimensions

Bore Diameter
4.25 in
8.00 in
108 mm
203 mm

Stroke
4.50 in
114 mm

Suction and Discharge Pipe Size
3 in

Inlet Port Design
NPT

Discharge Port Design
NPT

Length
40 in
1016 mm

Width
27 in
686 mm

Height
33 in
838 mm

Weight
680 lb
308 kg


Compressor Specifications

Speed at 25 hp (19 kW) Power
784 rpm
830 rpm
922 rpm
968 rpm

Speed at 30 hp (22 kW) Power
876 rpm
968 rpm
1014 rpm
1106 rpm

Pressure at 968 rpm Speed and 25 hp Power

100 psig
6.90 bar

Pressure at 922 rpm Speed and 25 hp Power
125 psig
8.62 bar

Pressure at 830 rpm Speed and 25 hp Power
175 psig
12.07 bar

Pressure at 784 rpm Speed and 25 hp Power
250 psig
17.24 bar

Pressure at 1106 rpm Speed and 30 hp Power
100 psig
6.90 bar

Pressure at 1014 rpm Speed and 30 hp Power
125 psig
8.62 bar

Pressure at 968 rpm Speed and 30 hp Power
175 psig
12.07 bar

Pressure at 876 rpm Speed and 30 hp Power
250 psig
17.24 bar

Capacity at 100 psig Pressure and 968 rpm Speed
101 ft³/min
2.86 m³/min

Capacity at 125 psig Pressure and 922 rpm Speed
96.5 ft³/min
2.73 m³/min

Capacity at 175 psig Pressure and 830 rpm Speed
85 ft³/min
2.41 m³/min

Capacity at 250 psig Pressure and 784 rpm Speed
78 ft³/min
2.21 m³/min

Capacity at 100 psig Pressure and 1106 rpm Speed
116 ft³/min
3.29 m³/min

Capacity at 125 psig Pressure and 1014 rpm Speed
105 ft³/min
2.97 m³/min

Capacity at 175 psig Pressure and 968 rpm Speed
99 ft³/min
2.80 m³/min

Capacity at 250 psig Pressure and 876 rpm Speed
87 ft³/min
2.46 m³/min


Lubrication
  • Superior lubrication is accomplished through a gear driven oil pump powered by the crankshaft.
  • Pressurized system ensures complete lubrication to the crankshaft, connecting rods, bearings and piston pins.
  • Full flow, spin-on oil filter ensures impurities are removed before the lubricant contacts any internal components.
  • Oil pressure gauge is conveniently mounted to display the oil pressure.


Valves
  • Concentric ring design incorporates both the inlet and outlet valves in one assembly.
  • Designed to give 100% exposure to the air flow for maximum efficiency (i.e. more CFM per HP).
  • Discs and springs are made of AISI 420 stainless steel to give dependable corrosion-free and fatigue-free service life.


Standard Features
  1. ASME pressure relief valve protects the intercooler and first stage from over pressure.
  2. Suction unloading valves (where applicable) provide load less starting and stopping as well as quick response to capacity demands.
  3. Removable hand-hole plate allows easy access to the internal running gear.
  4. Tri-Metal insert bearings are two-piece for quick and easy replacement.
  5. Counterbalanced crankshaft assures smooth operation.
  6. Replaceable piston pin bearings are very economical when replacement becomes necessary.
  7. Generously sized intercooler provides maximum cooling for the most efficient operation and low power consumption.
  8. Deep-finned cylinders and heads quickly dissipate the heat of compression.
  9. Crankshaft ends are supported by large tapered roller bearings for smooth operation and long life.
  10. Oil pressure gauge assures the operator of lubrication system integrity.
  11. The cylinders and crankcase are built of industrial strength cast iron materials.
  12. Continuous Operation



Print Back