|
|
|
|
|
|
|
|
|
|
Hankison® filters remove more contaminants with less pressure drop through housings that have large flow areas. Compare the operating pressure drop of competitive brands and remember that for every extra 2 psi of pressure drop, power input needs to be increased by 1%. A systems approach has been used to allow for convenient matching of filter types to achieve the air quality you desire, while comprehensive third party testing guarantees performance to CAGI (Compressed Air And Gas Institute), ISO (International Standards Organization) and PNEUROP (European Committee of Manufacturers of Compressors, Vacuum Pumps and Pneumatic Tools) standards.
With a greater selection of filter grades, more models to choose from and worldwide technical and service support, Hankison® offers a systemized solution for your compressed air quality needs.
|
|
|
|
A typical compressed air system is contaminated with abrasive solid particles such as dust, dirt, rust and scale, compressor lubricants (mineral or synthetic), condensed water droplets and acidic condensates and oil and hydrocarbon vapors.
If not removed, these contaminants increase pneumatic equipment maintenance costs, lead to instrument and control failure, contribute to poor product fit and finish, and contaminate processes.
The right Hankison® filter or filter system will remove these contaminants allowing your compressed air system to deliver the quality of air required by your application - whether it's plant air, instrument air, medical air or helping to ensure consistent output quality while minimizing operating costs.
|
|
|
|
|
|
|
- Withstands temperatures to 150 ºF (66 ºC)
- Push-on elements provide simple replacement
- Piston type seal keeps unfiltered air from by-passing element
- Stainless steel, corrosion resistant inner and outer cores
- Low resistance to flow
- Seam welded durability
- Matrix blended fiber media
- Large, effective surface area ensures high efficiencies and minimizes pressure drop
- Coated, closed cell foam sleeve
- Resists chemical attack from oils and acids
- Ensures high efficiencies by preventing re-entrainment of coalesced liquids
- Chemically resistant end caps
- Silicone free
|
|
|
|
Grade 11 Impact Type Moisture Separator- Provides bulk liquid removal
- Maximum inlet liquid load: 30,000 ppm w/w
Operation- Two stainless steel orifice tubes provide 10 micron mechanical separation
|
|
|
|
|
|
|
The HF Series is supported by a complete line of accessories and options making filter installation and differential pressure monitoring easy.
|
|
|
|
|
|
|
|
Electronic Filter Monitor
|
|
Predicts the optimal time to change the element.
|
|
|
|
|
|
|
|
|
Time-based Filter Monitor recommended.
|
|
|
