Energy Machinery, Inc. - New England's Compressed Air Specialists
Energy Machinery, Inc.
10 Reservoir Park Drive
Rockland, MA 02370
Toll Free: 1-800-643-4330
Phone: 781-871-6220
Fax: 781-878-7085
Email: info@energymachinery.com
Website: www.energymachinery.com
Print Back
The Gardner Denver XMX Series Demand Expander Control provides the benefits of managed compressed air storage and reduced system demand as a result of reduced system pressures. When used in conjunction with an ESP 20/20 Air Compressor Control System, the Demand Expander will provide for maximized air compressor efficiency by creating real storage in the receiver tanks. The system is then maintained at the lowest tolerable pressure level reducing the flow through leaks and unregulated applications.

The XMX Series Demand Expander Control will allow reduced plant air pressures, while maintaining air-flow thus enhancing the process through compressed air consistency.

The Single Valve design provides superior system flow control. The process quality valve and positioner provides exact demand flow control maintaining pressure at +/- 1/2 PSI in most systems.
XMX-Series
Unit of Measure
Items XMX-Series
XMX100
XMX Series - Demand Expander Control System 		XMX-Series
XMX1.500
XMX Series - Demand Expander Control System 		XMX-Series
XMX1200
XMX Series - Demand Expander Control System 		XMX-Series
XMX1300
XMX Series - Demand Expander Control System 		XMX-Series
XMX1400
XMX Series - Demand Expander Control System
Capacity N/A 500 scfm N/A 750 scfm N/A 1000 scfm N/A 2000 scfm N/A 3200 scfm
Inlet Connection N/A 1" NPT N/A 1.5" NPT N/A 2" FLG. N/A 3" FLG. N/A 4" FLG.
Outlet Connection N/A 1.5" NPT N/A 2" NPT N/A 3" FLG. N/A 4" FLG. N/A 6" FLG.
Length N/A 32 in N/A 34 in N/A 44 in N/A 51 in N/A 57 in
Width N/A 12 in N/A 14 in N/A 18 in N/A 20 in N/A 22 in
Height N/A 12 in N/A 15 in N/A 20 in N/A 24 in N/A 31 in
Weight N/A 250 lb N/A 275 lb N/A 295 lb N/A 375 lb N/A 625 lb
Technical Information N/A Storage Management
In conventional system designs, the storage (if it exists at all) is merely an extension of the piping and distribution system. When the Supply and the Demand are separated, storage can be reserved to handle instantaneous system events or compressor failures. The compressor automation system control is enhanced with the advantage of real storage when a Demand Expander is added to the system.

Artificial Demand is reduced because lower system pressures equate to lower system flows. Leaks will waste less air volume when pressure is reduced. Leaks will also be slower to expand under lower controlled pressure. Unregulated flows will also consume less air as a result of the Demand Expander.

System Security
The plant can now operate at pressure never before believed achievable due to the security provided by stored upstream volume in the air receivers. System events are not seen by the process.

System Stability
Most compressed air systems experience pressure fluctuations of 10% to 20%. As compressed air is an ingredient in the plant process, this inconsistency will have a negative impact on production. With Demand Expansion, the process sees only a constant pressure regardless of demand or coincidental system events.

Maximizes Compressor Efficiency
The use of storage provides the compressor control the ability to make a measured response to a fall or rise in the storage receivers. With an ESP 20/20 compressor controller, the Rate of Pressure Change in the storage receivers is calculated by the unique Bullseye algorithm and intelligent, energy efficient loading and operational decisions will be made.

Fail-Safe Operation
The XMX Series Demand Expander is provided with a fail open valve both electronically and pneumatically. Should the air signal or the control signal fail, the valve will open 100%. A manual three valve by-pass is included on the assembly to provide for continued air flow during valve maintenance periods.

Demand Expander Control
The Demand Expander can receiver its control from the Gardner Denver ESP 20/20 Compressed Air Management System or from a stand-alone electronic controller. Both methods provide equal control accuracy. Combining both compressor and Demand Expander control through the ESP 20/20 provides for the coordination of all setpoints to assure maximum system efficiency.

Optional Features
  • Optional Inlet Check Valve
  • Optional Inlet “Y” Strainer
  • Optional Control Air Filter and Dryer