Request Information
AVLAV is a two stage air compressor bare. All A-Series compressors are designed to provide optimum performance in a wide variety of operations.

Pressure Lubricated

Factory Fill with ChampLub 500
Unit of Measure

Specifications

Pressure

 N/A 25 inHg to 350 psig 6.9 to 17.24 bar

Motor Power

 N/A 25 hp30 hp19 kW22 kW

Construction Material

 N/A Cast Iron

Industry Standards/Certifications

 N/A Compressed Air and Gas Institute (CAGI) Energy Star Partner ISO 9001:2008

Dimensions

Bore Diameter

 N/A 4.25 in8.00 in108 mm203 mm

Stroke

 N/A 4.50 in114 mm

Suction and Discharge Pipe Size

 N/A 3 in

Inlet Port Design

 N/A NPT

Discharge Port Design

 N/A NPT

Length

 N/A 40 in1016 mm

Width

 N/A 27 in686 mm

Height

 N/A 33 in838 mm

Weight

 N/A 680 lb308 kg

Compressor Specifications

Speed at 25 hp (19 kW) Power

 N/A 784 rpm830 rpm922 rpm968 rpm

Speed at 30 hp (22 kW) Power

 N/A 876 rpm968 rpm1014 rpm1106 rpm

Pressure at 968 rpm Speed and 25 hp Power

N/A 100 psig6.90 bar

Pressure at 922 rpm Speed and 25 hp Power

 N/A 125 psig8.62 bar

Pressure at 830 rpm Speed and 25 hp Power

 N/A 175 psig12.07 bar

Pressure at 784 rpm Speed and 25 hp Power

 N/A 250 psig17.24 bar

Pressure at 1106 rpm Speed and 30 hp Power

 N/A 100 psig6.90 bar

Pressure at 1014 rpm Speed and 30 hp Power

 N/A 125 psig8.62 bar

Pressure at 968 rpm Speed and 30 hp Power

 N/A 175 psig12.07 bar

Pressure at 876 rpm Speed and 30 hp Power

 N/A 250 psig17.24 bar

Capacity at 100 psig Pressure and 968 rpm Speed

 N/A 101 ft³/min2.86 m³/min

Capacity at 125 psig Pressure and 922 rpm Speed

 N/A 96.5 ft³/min2.73 m³/min

Capacity at 175 psig Pressure and 830 rpm Speed

 N/A 85 ft³/min2.41 m³/min

Capacity at 250 psig Pressure and 784 rpm Speed

 N/A 78 ft³/min2.21 m³/min

Capacity at 100 psig Pressure and 1106 rpm Speed

 N/A 116 ft³/min3.29 m³/min

Capacity at 125 psig Pressure and 1014 rpm Speed

 N/A 105 ft³/min2.97 m³/min

Capacity at 175 psig Pressure and 968 rpm Speed

 N/A 99 ft³/min2.80 m³/min

Capacity at 250 psig Pressure and 876 rpm Speed

 N/A 87 ft³/min2.46 m³/min

Lubrication

Lubrication

 N/A
  • Superior lubrication is accomplished through a gear driven oil pump powered by the crankshaft.
  • Pressurized system ensures complete lubrication to the crankshaft, connecting rods, bearings and piston pins.
  • Full flow, spin-on oil filter ensures impurities are removed before the lubricant contacts any internal components.
  • Oil pressure gauge is conveniently mounted to display the oil pressure.

Valves

Valves

 N/A
  • Concentric ring design incorporates both the inlet and outlet valves in one assembly.
  • Designed to give 100% exposure to the air flow for maximum efficiency (i.e. more CFM per HP).
  • Discs and springs are made of AISI 420 stainless steel to give dependable corrosion-free and fatigue-free service life.

Standard Features

Standard Features

 N/A
  1. ASME pressure relief valve protects the intercooler and first stage from over pressure.
  2. Suction unloading valves (where applicable) provide load less starting and stopping as well as quick response to capacity demands.
  3. Removable hand-hole plate allows easy access to the internal running gear.
  4. Tri-Metal insert bearings are two-piece for quick and easy replacement.
  5. Counterbalanced crankshaft assures smooth operation.
  6. Replaceable piston pin bearings are very economical when replacement becomes necessary.
  7. Generously sized intercooler provides maximum cooling for the most efficient operation and low power consumption.
  8. Deep-finned cylinders and heads quickly dissipate the heat of compression.
  9. Crankshaft ends are supported by large tapered roller bearings for smooth operation and long life.
  10. Oil pressure gauge assures the operator of lubrication system integrity.
  11. The cylinders and crankcase are built of industrial strength cast iron materials.
  12. Continuous Operation