Request Information
Maximum Flexibility

The compact design of the ESM 6 allows you to install the package quickly and efficiently.
Unit of Measure

Technical Data ESM 6

Maximum Target Pressure1 N/A 10 bar145 psig
Capacity at Working Pressure2 N/A 0.93 m³/min33 ft³/min

Motor Power

 N/A 7.5 kW10 hp
Noise Level3 N/A 67 dBA

Length

 N/A 1540 mm

Width

 N/A 600 mm

Height

 N/A 1560 mm
Net Weight4 N/A 315 kg

Specifications

Air Receiver Capacity

 N/A 270 L

Industry Standards/Certifications

 N/A ISO 2151 ISO 3744 ISO 7183

Series

 N/A ESM

Brands

 N/A Gardner Denver™

Optional Maximum Flexibility

Optional Maximum Flexibility

 N/A Based on the customer requirements, these compressors can be supplied with many special options to provide a complete compressor station:
  • Tank mounted on 270 L
  • Tank mounted and with add-on refrigerant dryer plus filter kit
  • Different pressures available at 8, 10, and 13 bar

Easy to Use

Easy to Use

 N/A This package was designed to keep the design concept as simple as possible while at the same time it is so quiet that it can be installed where it is needed without special consideration for noise.

The electronic AirBasic2 controller has four easy-to-use operating buttons including easy adjustment of pressure settings via the controller.

Also the air end rotation control and following maintenance timer are displayed:
  • Air filter replacement
  • Oil filter replacement
  • Separator filter replacement
  • Oil change
  • Regular maintenance advise

Simple Maintenance

Simple Maintenance

 N/A Installation takes only a few minutes. All the service points are easily accessible through the removable side doors.

The simple design minimizes the number of moving parts, resulting in lower maintenance costs.
Air/Oil filter separator and oil filter are mounted side by side to ensure easy access for maintenance purposes.

Low Operating Costs

Low Operating Costs

 N/A ESM 6 compressors are optimal for users who want to attain the best possible working pressure with cost-effective functioning and low running costs. By using the high quality parts, you'll be able to reduce compressor's operation and maintenance costs and obtain the best possible result.

Your Benefits at a Glance

Your Benefits at a Glance

 N/A
  • High Reliability
  • Silent Operation
  • Designed to reduce and simplify maintenance operations
  • Easy to use
  • Advanced ENDURO® air end

AirBasic2 Controller

AirBasic2 Controller

 N/A Pressure setting can be easily adjusted via the controller.

Options

Options

 N/A Automatic condensate drain system Kit of filters with by-pass

Standard Equipment

Standard Equipment

 N/A
  • Air-inlet filter
  • Overload relay protection
  • Star/delta starter with AirBasic2 electronic controller
  • Pressure sensor for pressure control
  • Electric motors, IP 55, F-class insulation
  • Oil level monitoring, sight glass
  • Belt transmission
  • Safety devices for:
    • Motor overload
    • Compressor over temperature, trip at 110ºC
    • Compressor overpressure (safety valve)
  • Running condition indicators:
    • Pressure
    • Temperature
  • Total hours and load hours counter
  • Epoxy powder coated enclosure
  • After cooler
  • Oil thermostat
  • ENDURO® air end
  • Factory fill - AEON™ 3000 lubricant

Optional Equipment

Optional Equipment

 N/A
  • Special voltages
  • Refrigerant add-on dryer; 3ºC dew point at 25ºC ambient temperature (ISO 7183), refrigerant fulfils the EC norm No. 2037/2000 requirements
  • Filter kit for add-on dryer
  • Timed automatic drain for receiver

Auxiliary Equipment

Auxiliary Equipment

 N/A
  • Compressed air after treatment products.

Note

Note

 N/A For additional information please contact Gardner Denver™ or your local representative.
  • 1 Capacity and Power measurements according to ISO 1217. Measured at maximum pressure without any options.
  • 2 Capacity and Power measurements according to ISO 1217. Measured at maximum pressure without any options.
  • 3 Noise values determined according to ISO 2151 and ISO 3744; Variation ± 3 dB (KpA)
  • 4 Additional weight for add-on dryer 41 kg