Compressed air is discharged at elevated temperatures in a saturated condition. Any cooling which takes place through aftercoolers, dryers, or pipelines cause the water vapor to condense into a liquid form, which then mixes with any oil carryover of a machine. This contaminated condensate cannot be disposed of into sewer systems, or onto the ground, without being properly treated.
Tolerances - all dimensions are +/- .50 unless otherwise shown
Diffuser is rotatable in 90 degree increments
When properly maintained, the Eliminator II will have discharge water containing less than 15 ppm of oil remaining
Ratings based on rotary screw air compressor operating on AEON 9000 SP. Ratings may be increased by 25% if a refrigerated air dryer is not used. Please consult your Gardner Denver distributor for proper sizing when using other types of lubricants or compressors. Eliminator II is not recommended for use with emulsifying lubricant such as Polyglycol, ATF, or Motor Oil lubricants with heavy additive packages.
Specifications
Max CFM Capacity at 90 ºF/90%RH |
N/A 150 cfm |
Max CFM Capacity at 70 ºF/70%RH |
N/A 357 cfm |
Ambient Temperature |
N/A +32-120 ºF |
Inlet Temperature |
N/A 120 ºF |
Weight |
N/A 53 lb |
A |
N/A 29.75 in |
B |
N/A 27.00 in |
C |
N/A 20.75 in |
D |
N/A 11.25 in |
E |
N/A 5.25 in |
F |
N/A 16.00 in |
G |
N/A .75 in |
H |
N/A 26.50 in |
J |
N/A 26.00 in |
K |
N/A 9.00 in |
L |
N/A 14.00 in |
M |
N/A 19.50 in |
N |
N/A 4.50 in |
P |
N/A 2.75 in |
Q |
N/A 4.50 in |
R |
N/A 4.00 in |
Maintenance Kits |
N/A 7024364 |
Technical Information
N/A
Not all lubricants are created equal? Even lubricants of the same base stock perform
differently, depending upon the additives used.
|
Accessories
N/A
DISTRIBUTOR– Used to collect and evenly distribute flow into
multiple units; also recommended for use with high capacity demand drains to protect
Eliminator II from large condensate surges
|