Energy Machinery, Inc. - New England's Compressed Air Specialists
Energy Machinery, Inc.
10 Reservoir Park Drive
Rockland, MA 02370
Toll Free: 1-800-643-4330
Phone: 781-871-6220
Fax: 781-878-7085
Email: info@energymachinery.com
Website: www.energymachinery.com
Print Back
Global Air Treatment

Gardner Denver DGH Series Heatless Desiccant Dryers were designed to help you meet your goals. Customizable performance technology is integrated into our standard product so it can be tailored to benefit your specific critical compressed air drying application. Now, you have the liberty to personalize the performance of the standard product to adapt to your specific needs.
  • Pressure drop at rated flow is less than 5 psi
  • Standard voltages: Controllers automatically identify and adapt the controller:
    • Basic: 100-120V/1ph/5-60Hz;
    • Standard and Energy Savings controller: 100-240V/1ph/50-60Hz & 12-24 VDC
    • NEMA 4 Standard Feature with Standard and Energy Savings controllers

    Inlet flows are established in accordance with CAGI Standard ADF-200: Dual Stage Regenerative Desiccant Compressed Air Dryers-Methods for Testing and Rating. Conditions for rating dryers are: inlet pressure of 100 psig, inlet temperature saturated at 100°F.

    Average purge flow rate is the amount of purge air used during the regeneration portion of the purge cycle (purge/repressurization valve open) plus the volume of air used to repressurize the tower after the purge/repressurization valve closes averaged over the cycle time. At 100 psig, the average purge rate is: 14.4% (13.7% for regeneration + 0.7% for repressurization) of rated inlet flow for dryers operating on a 10 minute cycle; 15.5% (13.7% for regeneration + 1.8% for repressurization) for dryers on a 4 minute cycle.

    Outlet Flow: To determine flow of air available at outlet of dryer, subtract purge flow from inlet flow.
GDH-Series
Unit of Measure
1 

Item #

Inlet Flow at 100 psig, (7 bar)

Height

Width

Depth

Connections

Weight

DGH40 N/A 40 N/A 46 in N/A 32 in N/A 32 in N/A 1" NPT N/A 365 lb
DGH60 N/A 60 N/A 61 in N/A 32 in N/A 32 in N/A 1" NPT N/A 445 lb
DGH90 N/A 90 N/A 78 in N/A 32 in N/A 32 in N/A 1" NPT N/A 575 lb
DGH115 N/A 115 N/A 54 in N/A 44 in N/A 38 in N/A 1" NPT N/A 685 lb
DGH165 N/A 165 N/A 54 in N/A 44 in N/A 38 in N/A 1" NPT N/A 685 lb
DGH260 N/A 260 N/A 72 in N/A 48 in N/A 38 in N/A 2" NPT N/A 1010 lb
DGH370 N/A 370 N/A 63 in N/A 55 in N/A 38 in N/A 2" NPT N/A 1215 lb
DGH450 N/A 450 N/A 71 in N/A 55 in N/A 38 in N/A 2" NPT N/A 1350 lb
DGH590 N/A 590 N/A 101 in N/A 52 in N/A 48 in N/A 2" NPT N/A 1473 lb
DGH750 N/A 750 N/A 104 in N/A 54 in N/A 48 in N/A 2" NPT N/A 2134 lb
DGH930 N/A 930 N/A 109 in N/A 59 in N/A 56 in N/A 2" NPT N/A 2414 lb
DGH1130 N/A 1130 N/A 112 in N/A 63 in N/A 56 in N/A 3" ANSI Fig. N/A 2875 lb
DGH1350 N/A 1350 N/A 117 in N/A 65 in N/A 56 in N/A 3" ANSI Fig. N/A 3722 lb
DGH1550 N/A 1550 N/A 115 in N/A 71 in N/A 56 in N/A 4" ANSI Fig. N/A 4167 lb
DGH2100 N/A 2100 N/A 116 in N/A 79 in N/A 56 in N/A 4" ANSI Fig. N/A 4417 lb
DGH3000 N/A 3000 N/A 122 in N/A 78 in N/A 65 in N/A 4" ANSI Fig. N/A 9010 lb
DGH4100 N/A 4100 N/A 122 in N/A 93 in N/A 85 in N/A 6" ANSI Fig. N/A 9900 lb
DGH5400 N/A 5400 N/A 122 in N/A 102 in N/A 86 in N/A 6" ANSI Fig. N/A 12000 lb
Unit of Measure
1