Print Back
Sustainable Energy Saving Solutions

As energy costs continue to escalate globally, having a negative impact on plant profitability and production costs, sustainability initiatives in plant operations must be implemented to maintain a competitive advantage.
Unit of Measure

Specifications

Rated Flow1 N/A 190 scfm323 nm³/h

Voltage at 50 Hz Frequency

N/A 380 to 420 V

Voltage at 60 Hz Frequency

N/A 208 to 230 V460 V575 V

Phase

N/A 3

Frequency

N/A 50 Hz60 Hz

Power

N/A 1.36 kW

Inlet Connection Size

N/A 1 1/2 in

Inlet Connection Type

N/A NPT

Outlet Connection Size

N/A 1 1/2 in

Outlet Connection Type

N/A NPT

Height

N/A 39 in

Width

N/A 34 in

Depth

N/A 32 in

Weight

N/A 408 lb
Standard Δp3 Grade 92 N/A 3.3 psig0.2 bar
Optional Δp4 Grade 53 N/A 4.6 psig0.3 bar

Note for Connections

N/A BSP connections available

Maximum Working Pressure (Electric Drain)

N/A 232 psig16.0 bar

Minimum Working Pressure

N/A 30 psig2.1 bar

Maximum Inlet Air Temperature

N/A 130 ºF54 ºC

Minimum Inlet Air Temperature

N/A 40 ºF4 ºC

Maximum Ambient Air Temperature

N/A 110 ºF43 ºC

Minimum Ambient Air Temperature

N/A 40 ºF4 ºC

Series

N/A HES

Brands

N/A Hankison® SPX®

Industry Standards/Certifications

N/A Compressed Air and Gas Institute (CAGI) CSA C22.2 No. 236-05 ISO 7183 ISO 8573:2010 UL 1995

ISO 8573-1: 2010 Air Quality Classes

Air Quality Class

N/A 0 1 2 3 4 5

Maximum Number of Solid Particles per m³ for Class 0 and Particle Size 0.10 to 0.5 µ

N/A As specified by the equipment user or supplier and more stringent than class 1

Maximum Number of Solid Particles per m³ for Class 1 and Particle Size 0.10 to 0.5 µ

N/A ≤ 20000

Maximum Number of Solid Particles per m³ for Class 2 and Particle Size 0.10 to 0.5 µ

N/A ≤ 400000

Maximum Number of Solid Particles per m³ for Class 0 and Particle Size 0.5 to 1.0 µ

N/A As specified by the equipment user or supplier and more stringent than class 1

Maximum Number of Solid Particles per m³ for Class 1 and Particle Size 0.5 to 1.0 µ

N/A ≤ 400

Maximum Number of Solid Particles per m³ for Class 2 and Particle Size 0.5 to 1.0 µ

N/A ≤ 6000

Maximum Number of Solid Particles per m³ for Class 3 and Particle Size 0.5 to 1.0 µ

N/A ≤ 90000

Maximum Number of Solid Particles per m³ for Class 0 and Particle Size 1.0 to 5.0 µ

N/A As specified by the equipment user or supplier and more stringent than class 1

Maximum Number of Solid Particles per m³ for Class 1 and Particle Size 1.0 to 5.0 µ

N/A ≤ 10

Maximum Number of Solid Particles per m³ for Class 2 and Particle Size 1.0 to 5.0 µ

N/A ≤ 100

Maximum Number of Solid Particles per m³ for Class 3 and Particle Size 1.0 to 5.0 µ

N/A ≤ 1000

Maximum Number of Solid Particles per m³ for Class 4 and Particle Size 1.0 to 5.0 µ

N/A ≤ 10000

Maximum Number of Solid Particles per m³ for Class 5 and Particle Size 1.0 to 5.0 µ

N/A ≤ 100000

Water Vapor Pressure Dew Point for Class 0

N/A As specified by the equipment user or supplier and more stringent than class 1

Water Vapor Pressure Dew Point for Class 1

N/A ≤ -70 ºC≤ -94 ºF

Water Vapor Pressure Dew Point for Class 2

N/A ≤ -40 ºC≤ -40 ºF

Water Vapor Pressure Dew Point for Class 3

N/A ≤ -20 ºC≤ -4 ºF

Water Vapor Pressure Dew Point for Class 4

N/A ≤ +3 ºC≤ +37 ºF

Water Vapor Pressure Dew Point for Class 5

N/A ≤ +7 ºC≤ +45 ºF

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 0

N/A As specified by the equipment user or supplier and more stringent than class 1

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 1

N/A 0.01 mg/m³

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 2

N/A 0.1 mg/m³

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 3

N/A 1 mg/m³

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 4

N/A 5 mg/m³

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 0 (Weight/Weight)

N/A As specified by the equipment user or supplier and more stringent than class 1.

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 1 (Weight/Weight)

N/A 0.008 ppm

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 2 (Weight/Weight)

N/A 0.08 ppm

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 3 (Weight/Weight)

N/A 0.8 ppm

Total Oil Concentration (Aerosol, Liquid and Vapor) for Class 4 (Weight/Weight)

N/A 4 ppm

Additional Information

Additional Information

N/A Air treatment manufacturers are challenged to design equipment that consumes less energy while operating at reduced load. Hankison® HES Series Refrigerated Compressed Air Dryers are the ideal solution!

Sustainable energy saving solutions are the driving principle behind Hankison® product designs. The HES Series lowers power costs and improves productivity by matching power consumption to compressed air demand.

Load Matching Performance

Load Matching Performance

N/A Non-cycling dryers operate with the refrigeration compressor running continuously, regardless of inlet load conditions. Minimal energy savings are realized from 100% down to 0% inlet air load.

HES Series dryers automatically cycle (on/off) the refrigeration compressor in response to inlet load conditions. As the inlet air load is reduced, the power requirement to dry the air is matched in proportion to the demand.

For example, at 60% inlet air load, a non-cycling dryer consumes 96% of the full load power consumption, a 4% energy savings. By comparison, at 60% inlet air load, an HES Series dryer consumes 62% of the full load power consumption, a 38% energy savings.

The load matching design reduces power costs and saves energy. The example below provides annual HES energy savings with respect to non-cycling designs.

Delivers ISO 8573-1 Quality Class Air

Delivers ISO 8573-1 Quality Class Air

N/A The International Organization for Standardization (ISO) identified three forms of contamination as common in compressed air systems - solid particles, water and oil. ISO Standard 8573-1: 2010 categorizes each contaminant and assigns a quality class, ranging from Class 0, the highest purity level, to Class 9, the most relaxed.

The HES Series effectively removes all three contaminant forms in a single air treatment system.

Innovation at Work
  1. The standard dryer is equipped with a Grade 9 filter/separator
    • ISO Quality Class 3: Remaining solid particulate
    • ISO Quality Class 5: Pressure dew point
    • ISO Quality Class 5: Remaining oil concentration
  2. Optional Grade 5 high efficiency coalescing filters are available
    • ISO Quality Class 1: Remaining solid particulate
    • ISO Quality Class 5: Pressure dew point
    • ISO Quality Class 1: Remaining oil concentration

Rebate Ready, Energy Saving Design

Optimized Cabinet Design

N/A
  • Promotes ease of access from all four sides

Stainless Steel Brazed Plate Heat Exchangers

N/A
  • Compact, thermally efficient
  • Ensures delivery of an ISO 8573-1: 2010 Air Quality Class 5 pressure dew point

Integral Filtration

N/A
  • Standard Filter/Separator removes solids down to 3.0 microns and oil aerosols to 5.0 mg/m³
  • Optional Cold Coalescer removes solids down to 0.01 microns and oil aerosols to < 0.01 mg/m³

No Air Loss Condensate Drains

N/A
  • Electric demand drain are standard on models 190-675 scfm(323-1148 nm³/h)

Hermetically Sealed Refrigerant Compressor

N/A
  • Environmentally friendly R-134a refrigerant
  • High reliability, long service life

Rugged Glycol Reservoir

N/A
  • Stores food-grade propylene glycol cooling media
  • Leak-free, rotational molded construction

Reliable Thermal Media Circulation Pump

N/A
  • Continuously moves cooling medium through the dryer
  • Cartridge design promotes reliability and ease of service

Two Levels of Controls

N/A Standard Level I

Easy to monitor controls provide dryer status
  • Dryer on/off switch
  • Dryer on light
  • Thermal medium temperature
  • Dryer energized
  • Compressor on light
EMMConnect™ now available HES190 thru HES3000
  • Easy to read display provides continuous operating feedback
  • Service reminders for ease of regularly scheduled maintenance
  • Multiple alarms and safeties protect your investment
  • Energy saving control for more efficient operation
  • Event log stores critical data for the operating life of the machine
  • Data logging continuously stores 60 days of operating parameters
  • Ethernet communication capability for web-based remote monitoring
  • RS485 industrial communication protocol for remote monitoring capability
  • Master scheduler automatically controls preferred timing of dryer operation
  • Multiple Language capability for global application

Delivers Performance, Sustainability and Safety

Delivers Performance, Sustainability and Safety

N/A The Drying Process-Compressed Air Circuit:
  1. Warm, saturated compressed air enters the dryer through the inlet pipe connection.
  2. Air travels through the air-to-air heat exchanger and the glycol-to-air heat exchanger. Propylene glycol surrounds the passages and cools the air to the desired pressure dew point.
  3. Moisture, solid particulates and oil aerosols are removed by the filter/separator. A no-air-loss condensate drain discharges contaminants from the system.
  4. Dry, filtered air exits the dryer for use.


  5. The Cooling Process-Glycol Circuit:
  6. Glycol exits the air-to-glycol heat exchanger and then enters the glycol storage tank.
  7. A circulation pump continuously moves the thermal medium throughout the circuit.
  8. A thermal sensor monitors the glycol temperature and turns the refrigeration compressor off whenever the glycol is cooled to its lowest temperature. The cooling medium continues to dry the air. After the medium warms up, the thermal sensor restarts the refrigeration compressor.
  9. The glycol-to-refrigerant heat exchanger chills the thermal media and travels back to the air-to-glycol heat exchanger.

Our Commitment to You

Third Party Performance Certification

N/A Hankison® is a member of the Compressed Air and Gas Institute (CAGI), a non-profit organization that develops and publishes standards serving the compressed air industry.

CAGI members may participate in an independently controlled Performance Verification Program for refrigerated air dryers in the flow range of 90 scfm to 675 scfm. Certification through a third party laboratory provides end-users an industry accepted basis for comparison of refrigerated air dryer performance and selection.

Standardized performance data sheets are posted on the Hankison® website.

Customer Support Solutions

N/A As an extra measure of protection, Hankison® provides an extended warranty beyond the standard 2 year coverage. Purchase a maintenance kit on an annual basis and receive an additional 3 years of protection, parts and labor. All major components are covered. Receive automatic email reminders when it's time to service your product.

Note

Note

N/A The annual purchase of a maintenance kit provides a lifetime of ISO Quality Class Air.

For ISO 8573-1: 2010 Quality Classes
To best define the air quality requirements for your specific application
  • 1 Rated Flow Capacity - Conditions for rating dryers are in accordance with ISO 7183 (option A2) working conditions: inlet air temperature 100 ºF (38 ºC), inlet air pressure 100 psig (6.9 bar), ambient air temperature 100 ºF (38 ºC), 100% saturated air, operating on 60 Hz power supply.
  • 2 Pressure drop inclusive of integral filtration
  • 3 Cumulative pressure drop includes Grade 9 and Grade 5 filter/separator elements