Print Back
The Challenges of More Horsepower & More CFM

Heat Control
As the majority of reciprocating compressors’ discharge temperatures can reach a 400° F level or higher, maximizing the motor’s service life and its long term reliability remains the challenge in designing a 10 and 15 horsepower quiet enclosed compressor. More CFM requires a larger compressor, so removing the heat from the low noise enclosure requires another creative engineering solution.
The 10 and 15 horsepower Paradigm solution implements dual cooling fans that pull cool ambient air from the bottom of the compressor through the package and discharge it through the top of the enclosure. Isolated coolers take the heat from the compressor pump through the included air cooled after cooler further reducing the temperature inside the enclosure.

Vibration Minimization
Similar to its 5 and 7.5 horsepower little brother, the 10 and 15 horsepower models have a onepiece powder coated inner base that supports both the compressor and the motor. Rubber vibration isolators separate the inner base from the enclosure for maximum noise and vibration control. The sound attenuating enclosure, made of 16 and 12 gauge steel with additional foam insulation, enables the compressor package to run quieter.
Unit of Measure

Specifications

Type

N/A Horizontal Tank Mounted Units

Motor Power

N/A 7 1/2 hp

Tank Capacity

N/A 80 gal

Pump Comp Model

N/A RP15B

Length

N/A 67 in

Width

N/A 31 1/2 in

Height

N/A 53 1/2 in

Approximate Shipping Weight

N/A 762 lb

Sound Level

N/A 68 dBA
175 PSI Rating1 N/A 990 rpm

175 PSI Rating - Displ.

N/A 28.7 cfm

175 PSI Rating CFM Delivery

N/A 22.4 cfm

Standard Features

N/A

  • Multi-finned cylinders for cooler operating temperatures resulting in long life and consistent performance.
  • Two compression rings and one oil control ring to ensure low oil carry-over and provide efficient air delivery.
  • Large-diameter finned tubing with the greatest cooling effect between stages for maximum compressor efficiency.
  • Pressure relief valves located in inter-stage intercooler and discharge line for safe compressor operation.
  • Precision balanced flywheel with cast fan blades for optimum compressor cooling and longer life.
  • Removable manifolds for easy serviceability.
  • Balanced rugged ductile iron crankshaft with large diameter throws for minimum bearing loads and counterweights to minimize vibration.
  • Rugged cast iron oil reservoir with convenient sight gauge glass, corner oil fill boss and large oil drain for user-friendly serviceability.
  • A pressure switch allows the compressor to start unloaded every time. This ensures the lowest amount of starting torque is required by the electric motor
  • Magnetic starter for thermal overload protection
  • Manual tank drain
  • Standard start/stop control
  • Low Oil Level Shutdown
  • Sound attenuating enclosure for low noise operation
  • Front and back panels can be easily removed for fast and easy service access
  • Ball valve on crankcase drain for easy maintenance of lubricant
  • Air intake pre-filter
  • Package easily fits through a standard 36" door
  • 80/20 duty cycle

Optional Accessories

N/A

  • Moisture Separator
  • Dual Control
  • High Temperature Shut Down
  • Electric Tank Drain
  • Vibration Isolators

Sound Testing

N/A With a commitment to research and development, Gardner Denver provides our customers with products which uphold our tradition of quality and proven results. As part of the new product development process, the Paradigm has passed extensive design reviews as well as performance, endurance and sound testing requirements.

  • 1 Units tested in accordance with CAGI/PNEUROP Acceptance Test Code PN2CPTC2.