Rotary Screw Air Compressors with Dryer

Apex 5–15 HP
Load/No Load Control

Peak Performance

The Gardner Denver Apex series offers the performance and reliability that you demand, delivered by a simple and proven industrial design. With industrial grade components the Apex series is not a typical throw-away compressor! It is an investment in your organization’s future.

Efficiency
Instead of developing a package and then selecting an airend, we designed the airend and then built the package. The newly enhanced airend included in the Apex Series has improved efficiency by over its predecessor and increased bearing life over 50%.

Low Sound
With dBA levels as low as 67, the Apex Series can be installed next to the point-of-use. In addition to lower overall installation costs, the low sound level results in a safer work environment.

Compact
With a 27 x 31 x 43 footprint, the Apex Series has one of the smallest footprints in the industry.

Ease of Maintenance
The Apex Series has been designed so all routine maintenance can be accomplished in as little as 15 minutes, with no specialized tools needed!
Unit of Measure

Specifications

Working Pressure

N/A 110 psig125 psig175 psig

Capacity at Rated Pressure

N/A 26.5 acfm at 125 psig 36.5 acfm at 110 psig 41 acfm at 175 psig

Motor Power at 60Hz

N/A 10 hp

Receiver Size

N/A 80 gal

Net Weight

N/A 1030 lb

Net Weight with Dryer

N/A 1190 lb

Length

N/A 27 in

Width

N/A 31 in

Height

N/A 43 in

Length with Drayer

N/A 63 in

Height with Dryer

N/A 32 in

Width with Dryer

N/A 73 in

Noise Level

N/A 70 dBA

Standard Equipment - Base Mounted Unit

N/A After Cooler: Radiator-Type
Air Hoses: Stainless Steel, Over-Braided
Air/Oil Separator: Spin-On Type
Belt: V-Belt
Belt Adjustment: Jack-Bolt Tensioning Device
Control Lines: Corrosion-Resistant Tubing
Control Enclosure: UL Type 4 (NEMA 4) Listed
Controller: AirSmart™ Microprocessor

  • Automatic Start/Stop or Load/Unload Operation
  • Auto Blow-Down With Adjustable Timed Stop
  • Full Text Liquid Crystal Display (LCD)
  • Displays Hourmeter (loaded and total), Discharge Air
  • Temperature, System/Reservoir Pressure
  • Separator Differential Pressure
Design Codes:
  • UL/cUL Labeled Electronics - Including Control Panel
  • CSA Labeled and Approved Electrical Controls and Wiring
Discharge Pressure Check Valve (Minimum)
Enclosure: 16 Gauge Steel, 67–70 dBA
Inlet Air Filter:99.9% at 5 Micron, Two-Stage, High Eff.
Moisture Separator/Trap
Motor: TEFC Drive, 1.15 Service Factor, 5 Year Warranty,
3 ph models are EISA Energy Efficient
Oil Cooler: Radiator-Type
Oil Reservoir: Pressure Relief Valve, CRN Approved
Oil Filter: Spin-On Type, 30 Micron, Full Flow
Oil Hoses: Stainless Steel, Over-Braided
Starter: Mounted and Wired Full-Voltage Starter
Thermal Mixing Valve: Thermostatic

Standard Equipment - Receiver Mounted Unit

N/A Includes All of the Base-Mounted
Standard Equipment PLUS:

Air Supply Lines: Stainless Steel

Condensate Drain: Automatic, Zero Air Loss

Fork Lift Slots: Integrated, Enclosed

Standard Equipment - Receiver Mounted Unit with Refrigerated Dryer

N/A Includes All of the Base-Mounted
and Receiver-Mounted
Standard Equipment PLUS:

Dryer: Non-Cycling Refrigerated with 38°F dew point.

3-Way Bypass Valve

Optional Equipment

N/A Cold Coalescing Filter (Units with Dryer Only)

Communication/Sequencing Module:

  • Sequencing of up to Eight Compressors
  • Remote Monitoring Ready
  • Date and Time Stamping
Wye Delta Motor/Starter: 10 & 15 HP only