The Gardner Denver™ Paradigm provides the advantages of a reciprocating compressor coupled with the low noise of a rotary screw. Ideal for areas with a low noise requirement, Paradigm can be installed directly within the work environment close to the point-of-use. This eliminates the need for a dedicated room or an outside installation and can save hundreds of feet in piping resulting in reduced pressure drops, ultimately increasing your bottom line.

Blazing a new path in reciprocating compressors, the Gardner Denver Paradigm is a perfect choice for applications with intermittent duty and a low noise requirement. Paradigm delivers powerful performance, easy maintenance, and extremely low noise levels all in one package to provide maximum customer satisfaction. Establish a Paradigm in innovation, quality, reliability, long life and high performance.

Heat Control
The majority of reciprocating compressors’ discharge temperatures can reach a 400° F level or higher. Locating a compressor and motor together in the same cabinet requires a creative heat control solution. The heat from the compressor operation increases the electric motor operating temperature, thus reducing the motor’s service life and long-term reliability. The Paradigm 5 and 7.5 horsepower solution offers two separate cooling circuits with each one pulling cool ambient air. With the electric motor operating in its own isolated area of the package, Paradigm ensures the temperatures outlined by the motor manufacturer are not exceeded. Reliability and quiet operation are the result of this impressive engineering solution.

Vibration Minimization
A one-piece powder coated inner base supports both the compressor and the motor. Rubber vibration isolators separate the inner base from the enclosure for maximum noise and vibration control. The sound attenuating enclosure, made of 16 gauge steel with additional foam insulation, enables the compressor package to run quieter. Additional vibration pads between the enclosure and the tank are added for unmatched quiet operation.
Unit of Measure

Specifications

Type

N/A Base Mounted Units

Motor Power

N/A 7 1/2 hp

Pump Comp Model

N/A RP15B

Length

N/A 40 1/2 in

Width

N/A 31 1/2 in

Height

N/A 31 in

Approximate Shipping Weight

N/A 534 lb

Sound Level

N/A 68 dBA
175 PSI Rating1 N/A 990 rpm

175 PSI Rating - Displ.

N/A 28.7 cfm

175 PSI Rating CFM Delivery

N/A 22.4 cfm

Standard Features

N/A

  • Multi-finned cylinders for cooler operating temperatures resulting in long life and consistent performance.
  • Two compression rings and one oil control ring to ensure low oil carry-over and provide efficient air delivery.
  • Large-diameter finned tubing with the greatest cooling effect between stages for maximum compressor efficiency.
  • Pressure relief valves located in inter-stage intercooler and discharge line for safe compressor operation.
  • Precision balanced flywheel with cast fan blades for optimum compressor cooling and longer life.
  • Removable manifolds for easy serviceability.
  • Balanced rugged ductile iron crankshaft with large diameter throws for minimum bearing loads and counterweights to minimize vibration.
  • Rugged cast iron oil reservoir with convenient sight gauge glass, corner oil fill boss and large oil drain for user-friendly serviceability.
  • A pressure switch allows the compressor to start unloaded every time. This ensures the lowest amount of starting torque is required by the electric motor
  • Magnetic starter for thermal overload protection
  • Manual tank drain
  • Standard start/stop control
  • Sound attenuating enclosure for low noise operation
  • Front and back panels can be easily removed for fast and easy service access
  • Ball valve on crankcase drain for easy maintenance of lubricant.
  • Package easily fits through a standard 36" door
  • 80/20 duty cycle

Optional Accessories

N/A

  • NEMA 4 Starter/Pressure switch
  • Moisture Separator
  • Dual Control
  • Low Oil Level Shutdown
  • High Temperature Shut Down
  • Electric Tank Drain
  • TEFC Motors
  • Premium Efficiency Motors
  • Vibration Isolators

Sound Testing

N/A With a commitment to research and development, Gardner Denver provides our customers with products which uphold our tradition of quality and proven results. As part of the new product development process, the Paradigm has passed extensive design reviews as well as performance, endurance and sound testing requirements.

Compressor Features for Superior Value

N/A

  • Industrial grade compressor with unique features including gasketless cylinder/head design, stainless steel valve disks and tapered roller main bearings for superior dependability.
  • Unique domed piston design for maximum air delivery and efficiency.

Quality Package Design

N/A

  • Separate compressor and motor chambers with dedicated cooling circuits for cooler operation and longer life.
  • Oil site gauge for ease of monitoring and service.
  • Integrated heavy-duty air cooled aftercooler for up to 65% moisture removal.
  • Filter maintenance indicator, showing a need for a filter change, for userfriendly monitoring.
  • Rubber vibration isolators, separating inner base from the enclosure, for maximum noise and vibration control.
  • Innovative belt tensioning system for easy service.

Acoustic Enclosure

N/A

  • Standard enclosure provides a low 67 dBA (5 hp) & 68 dBA (7.5 hp) noise level to ensure quiet operation at any facility.
  • Easy access to all service areas provided by latched panels, which could be easily removed.

Complete Aftermarket Support

N/A

  • A complete line of Gardner Denver™ aftermarket products is available to ensure the long life of each compressor.

  • 1 Units tested in accordance with CAGI/PNEUROP Acceptance Test Code PN2CPTC2.