Reliable Operation…

Customers around the world have relied on Hankison® for great value in air treatment solutions. Hankison® Value Line Refrigerated Dryers offer a simple solution based on a long history of industry leading technology.
Unit of Measure

Specifications

Rated Flow1 N/A 200 scfm340 m³/h

Refrigerant

N/A R407c

Voltage

N/A 230 V

Phase

N/A 1

Frequency

N/A 60 Hz

Power

N/A 1.53 kW

Inlet Connection Size

N/A 2 in

Inlet Connection Type

N/A NPT

Outlet Connection Size

N/A 2 in

Outlet Connection Type

N/A NPT

Height

N/A 30 in

Width

N/A 18 in

Depth

N/A 37 in

Weight

N/A 196 lb

Maximum Inlet Air Pressure

N/A 232 psig16 bar

Minimum Inlet Air Pressure

N/A 10 psig1 bar

Maximum Inlet Air Temperature

N/A 120 ºF49 ºC

Minimum Inlet Air Temperature

N/A 40 ºF4 ºC

Maximum Ambient Air Temperature

N/A 110 ºF43 ºC

Minimum Ambient Air Temperature

N/A 45 ºF7 ºC

Series

N/A Hankison® HRP HRPN

Ease of Monitoring

Ease of Monitoring

N/A
  • Models 75 - 150: Illuminated On/Off Switch; dew point temperature display indicator to monitor inlet load conditions.
  • Models 200 - 500 scfm: Illuminated On/Off Switch; LED dew point temperature display; dry alarm contact.
    • Equipped with panel mounted drain timer control.

Safety First - Environmental Friendly

Safety First - Environmental Friendly

N/A
  • CFC free R134a refrigerant.
  • CSA approved.

Globally Proven Performance

Globally Proven Performance

N/A
  • Stainless steel, cross flow heat exchangers optimize heat transfer and service life.
    • ISO 8573-1 Air Quality : Class 4 pressure dew point.
    • Smooth, non-fouling channels promote low pressure drop.
  • Herringbone geometry stamped into the stainless steel plates creates turbulent flow, for a self-cleaning effect.
    • No pre-filter required for full 2 year warranty.
    • 5 year heat exchanger warranty.
  • Stainless steel inlet and outlet connections promote corrosion free service.
  • Compact design saves floor space.

Efficient Condensate Management

Efficient Condensate Management

N/A
  • Increased calming zone and integral demister/separator captures liquid condensate and solid particles<.ul>
  • Effectively removes condensate from 0 to 100 % flow conditions without moisture carry-over.
  • Furnished with a timed electric condensate drain.
    • Includes a Y-strainer to protect the valve from rust and scale.
  • International Air Quality Class Standards

    ISO 8573-1 Air Quality Standard

    N/A ISO 8573-1, the international standard for compressed air quality, defines the amount of contamination permissible in compressed air.
    The ISO standard identifies three primary forms of contamination in compressed air systems - solid particles, water and oil Contaminants are classified and assigned a quality class, ranging from Class 0, the highest purity level, to Class 6, the most relaxed.

    HPR and HPRN series refrigerated air dryers offer the perfect balance between technology and simplicity to dry compressed air systems to ISO 8573-1 Air Quality Class 4 to 5 - pressure dew points.

    Option Pre-Filtration

    N/A NGF series - PF grade filtration - removes solid and oil contaminants from the air stream before entering the dryer.

    ISO Air Quality Class:
    • Solids - Class 2
    • Remaining Oil - Class 4
    • Removes solids 1.0 micron and larger
    • Remaining oil content 2.0. mg/m³

    Option After-Filtration

    N/A NGF series - HF grade filtration - provides high efficiency oil removal protecting downstream equipment .

    ISO Air Quality Class:
    • Solids - Class 1
    • Remaining Oil - Class1
    • Removes 99.999+ % of solids ≥ 0.01 micron
    • Remaining oil content < 0.01 mg/m3
    • 1 Conditions for rating dryers are in accordance with ISO 7183 (Option A2). Compressed air at dryer inlet: 100 psig (6.7 bar) and 100 ºF (38 ºC); ambient air temperature: 100 ºF (38 ºC); operating on 60 Hz power supply.